Official Series Description


Lab Data Summary

Aggregate lab data for the WALNUT GROVE soil series. This aggregation is based on all pedons with a current taxon name of WALNUT GROVE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to WALNUT GROVE were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
102AUMN3203S1979MN1013203Walnut Grove3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.1820793,-95.5431747
103UMN2112S1975MN0332112Walnut Grove2Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.0832787,-95.2788391
103UMN2129S1975MN0332129Walnut Grove2Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.0799294,-95.280365
103UMN2131S1975MN0332131Walnut Grove2Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.084095,-95.2768326

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the WALNUT GROVE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the WALNUT GROVE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the WALNUT GROVE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the WALNUT GROVE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

Click the image to view it full size.

Competing Series

Soil series competing with WALNUT GROVE share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the WALNUT GROVE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the WALNUT GROVE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with WALNUT GROVE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing WALNUT GROVE as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
North Twin-Walnut Grove complex, 0 to 2 percent slopesL198A1480817131011vhmbmn03320081:12000
North Twin-Walnut Grove complex, 1 to 4 percent slopesL198B37516136741r550mn03320081:12000
Walnut Grove-Pell Creek complex, 0 to 2 percent slopesL209A9116136831r559mn03320081:12000
North Twin-Walnut Grove complex, 1 to 4 percent slopesL198B758823841842l0y5mn08320081:12000
North Twin-Walnut Grove complex, 0 to 2 percent slopesL198A735123841902l0ycmn08320081:12000
North Twin-Walnut grove complex, 1 to 4 percent slopesL198B685023866072l3gbmn10120081:12000
North Twin-Walnut grove complex, 0 to 2 percent slopesL198A268323866062l3g9mn10120081:12000
Moines-Walnut Grove complex, 1 to 3 percent slopesL247A723990642ljf5mn10120081:12000
North Twin-Walnut grove complex, 0 to 2 percent slopesL198A708023841702l0xqmn12720081:12000
North Twin-Walnut grove complex, 1 to 4 percent slopesL198B648923841652l0xkmn12720081:12000
Moines-Walnut grove complex, 1 to 3 percent slopesL247A123123991562ljj4mn12720081:12000

Map of Series Extent

Approximate geographic distribution of the WALNUT GROVE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .